RI1- DCE / IP-TO-SYNC CONTROLLER

RI10 DCE / IP-TO-SYNC Controller

The RI10 DCE/IP-to-Sync Controller is a 19″ rack-mountable hardware platform for transferring Synchronous Serial Data over Ethernet (UDP/IP). By utilizing the RI10, the transfer of encrypted bulk Data-over-IP over extended distances is possible whilst leveraging on the already installed base of high performance COMSEC devices.

The RI10 product breaks continuous serial data stream into fixed size packets, adds the IP framing and sends the data over a packet switched Ethernet network, e.g. Defence LAN/WAN to a remote Tx or Rx Site. In the reverse direction, the IP Data received via the LAN is de-encapsulated and synchronously clocked into the data encryption equipment, e.g. KIV-7.

The RI10 DCE variant is positioned between the COMSEC device and the Wide Area Network (WAN). On the radio equipment side the RI10 DTE variant operates as a Data Terminal Equipment (DTE) device. If the RapidM RM10 HF Wideband Modem is used, RI10 DTE variant is not required as the RM10 provides an embedded DATA LAN/WAN Port.

Features and Benefits

  • DCE & DTE Variants Available
  • Converts EIA-530 Serial to IP
  • Interfaces
    • DCE: Synchronous & Asynchronous Modes
      · EIA-530, EIA-530A
      · RS-232, RS-422
      · Internal/External Clocks
    • IP: UDP/IP via Ethernet
      · 10/100/1000 Electrical
      · IEEE 802.3
  • Deployment – ship-borne & shore station/split-site
  • Companion Products – RI10 DCE variant or RM10
  • Data Rate
    • Sync: 50 bps to 128 kbps (Half Duplex)
    • Sync: 50 bps to 64 kbps (Full Duplex)
    • Async: 50 bps to 480k8 bps (Half/Full Duplex)
  • Menu-Driven control & configuration
  • DTE port – Synchronous / Asynchronous
  • Ethernet LAN interfaces – for Control and IP-based Data services
  • Factory Presets – lower integration effort
Contact us for pricing

Applications

Product Family

This product has not been associated with any families.

Product Accessories

System Architecture Diagrams